USD
EUR
Your position: Home > E-Cigarette Kit
- Description
- Payment Methods
- Shipping and Tracking
Authentic Aspire Spryte AIO 650mAh Pod System Starter Kit (1.2 Ohm / 1.8 Ohm, 2ml / 3.5ml)
Parameter
Depth 26mm (1.02 inch)
Height 108mm (4.25 inch)
Width 26mm (1.02 inch)
Weight 70g (2.47oz)
Shipping Type Built-in Battery
Features
Output wattage: 12W;
Built-in battery capacity: 650mAh;
Pod capacity: 3.5ml / 2.0ml;
Size: 26mm x 108mm;
Adjustable airflow system;
Two different BVC coils for regular e-liquid / nicotine salts;
Resistance: 1.8ohm / 1.2ohm;
The Sprytes sleek minimalist design fits well in pocket or purse and the protective top cap fits snugly on to the bottom of the device when in use.
Unusually for an AIO pod device of this type, the Aspire Spryte has an adjustable airflow system to suit your vaping preference.
The Aspire Spryte atomizer is the well-known and trusted BVC coil and uses nichrome wire. The Spryte comes supplied with two coils, one for regular e-liquid and one for use with nicotine salts, though it works equally well with normal e-liquids.
Whatever type of coil you use, the standard BVC or the nic-salts BVC, both are easy to install. Simply remove the pod and turn it upside down, remove the chimney unit and screw in your chosen coil. Replace the chimney unit with attached coil and reinsert into the pod. Push the pod back into the Spryte until it clicks.
Note: when inserting a new coil and filling the pod, always let the device stand for 5 minutes to allow the coil to become saturated. This will help avoid dry hits and damage to the coil.
Refilling the pod is super easy. Remove the pod from the device, invert the pod and remove the silicone plug from the 4.6 diameter filling hole. Fill the pod with e-liquid, and replace the silicone plug securely. Replace the pod into the device by pushing down until it clicks into place, and its ready.
Charging the Aspire Spryte is also very simple. Just plug in the supplied micro usb cable into the base of the mod, attach the other end to a suitable power supply to charge. The maximum charge current can reach up to 1000mA. When attached to the usb with the power on the LEDs will flash blue and red three times, when fully charges the LEDs will flash blue and red twenty times then remain off.
Package Included
1* Authentic Aspire Spryte AIO 650mAh Pod System Starter Kit
1* Extra O-rings
2* Coils (1.8ohm Regular & 1.2ohm for Nic Salt)
1* Silicone Seal
1* Micro USB Cable
1* Warranty Card
1* User Manual
Parameter
Depth 26mm (1.02 inch)
Height 108mm (4.25 inch)
Width 26mm (1.02 inch)
Weight 70g (2.47oz)
Shipping Type Built-in Battery
Features
Output wattage: 12W;
Built-in battery capacity: 650mAh;
Pod capacity: 3.5ml / 2.0ml;
Size: 26mm x 108mm;
Adjustable airflow system;
Two different BVC coils for regular e-liquid / nicotine salts;
Resistance: 1.8ohm / 1.2ohm;
The Sprytes sleek minimalist design fits well in pocket or purse and the protective top cap fits snugly on to the bottom of the device when in use.
Unusually for an AIO pod device of this type, the Aspire Spryte has an adjustable airflow system to suit your vaping preference.
The Aspire Spryte atomizer is the well-known and trusted BVC coil and uses nichrome wire. The Spryte comes supplied with two coils, one for regular e-liquid and one for use with nicotine salts, though it works equally well with normal e-liquids.
Whatever type of coil you use, the standard BVC or the nic-salts BVC, both are easy to install. Simply remove the pod and turn it upside down, remove the chimney unit and screw in your chosen coil. Replace the chimney unit with attached coil and reinsert into the pod. Push the pod back into the Spryte until it clicks.
Note: when inserting a new coil and filling the pod, always let the device stand for 5 minutes to allow the coil to become saturated. This will help avoid dry hits and damage to the coil.
Refilling the pod is super easy. Remove the pod from the device, invert the pod and remove the silicone plug from the 4.6 diameter filling hole. Fill the pod with e-liquid, and replace the silicone plug securely. Replace the pod into the device by pushing down until it clicks into place, and its ready.
Charging the Aspire Spryte is also very simple. Just plug in the supplied micro usb cable into the base of the mod, attach the other end to a suitable power supply to charge. The maximum charge current can reach up to 1000mA. When attached to the usb with the power on the LEDs will flash blue and red three times, when fully charges the LEDs will flash blue and red twenty times then remain off.
Package Included
1* Authentic Aspire Spryte AIO 650mAh Pod System Starter Kit
1* Extra O-rings
2* Coils (1.8ohm Regular & 1.2ohm for Nic Salt)
1* Silicone Seal
1* Micro USB Cable
1* Warranty Card
1* User Manual
Product reviews can be carried out after the member login, please click here to login
You May Like
-
$80.99
-
$80.99
-
$80.99
-
$80.99
-
$80.99
-
$80.99
-
$80.99
-
$44.99
-
$44.99
