USD
EUR
Your position: Home > VV/VW Temperature Control Mod
- Description
- Payment Methods
- Shipping and Tracking
Authentic Cool Vapor STAN 200W VW Variable Wattage Box Mod
Parameter
Depth 50mm (1.97 inch)
Height 88mm (3.46 inch)
Width 31mm (1.22 inch)
Weight 87g (3.07oz)
Features
Material: Zinc alloy + PC
Input voltage: 6.6~8.4V
Battery: 2 x 18650 batteries not included)
Power range: 5~200W
Voltage output range: 1V~8.0V
Quiescent current: below 50uA
Operating modes: 1. Power mode; 2. Voltage mode; 3. Mechanical mode
Resistance range of atomizer: 0.1~3 ohm
Display: 0.96 color screen with a black frame to avoid light-leaking
1. Functions of Keys
A. Press the "POWER" key for 5 consecutive times to power on or power off. The interface "COOLVAPOR" appears upon powering on; and the green light flashes for 3 times. "CHIPS BY SEVO" appears upon powering off.
B. Press the "POWER" key for 3 consecutive times to switch among power mode (to set the output power), voltage regulation mode and mechanical smoke mode.
C. Long press the "POWER" key to suck the smoke away; the white light flashes; the maximum heating time is 10s, after which the heating is stopped automatically with a prompt "Over time 10S".
D. Simultaneously press "+" and "-" to lock or unlock the keys. "KEY LOCK" appears when the keys are locked and "KEY UNLOCK" when they are unlocked. In case of any key operation when keys are locked, "Please Unlock" appears to prompt to unlock.
E. Press "POWER" and "-" to set the number of smoke suction port by pressing + or - when the number flashes. Short press the ignition key to confirm. If the number is 0, the number of ports is not limited. "Puff Limit" appears to prompt the excess of the number set.
F. Red light and red font on the display screen indicate abnormalities.
2. Intelligent Protection Functions and Prompts
A. Load short-circuit protection Shorted
B. Low load resistance protection: Low Resistance
C. High load resistance protection: High Resistance
D. Overtemperature protection: "Too Hot!" appears when the internal temperature of the circuit is too high; in such case, wait several seconds to let temperature go down before continuing to use.
E. Battery reverse connection protection: Battery reverse connection does no harm to the product, but it cannot be powered on.
F. Low battery voltage protection:
When the battery voltage is below 6.6V, no discharge operation is allowed. In such case, "Please Charge" is displayed when pressing the POWER key.
G. High battery voltage protection: When the battery voltage is detected to be
higher than 8.4V, it is deemed as abnormal power supply. In such case, "High Voltage" is displayed when pressing the POWER key.
In case of poor battery performance or long-time high-power continuous discharge, the battery voltage will be too low. "Weak Battery" appears to stop discharge at this moment.
Package Included
1* Authentic Cool Vapor STAN 200W VW Variable Wattage Box Mod
Parameter
Depth 50mm (1.97 inch)
Height 88mm (3.46 inch)
Width 31mm (1.22 inch)
Weight 87g (3.07oz)
Features
Material: Zinc alloy + PC
Input voltage: 6.6~8.4V
Battery: 2 x 18650 batteries not included)
Power range: 5~200W
Voltage output range: 1V~8.0V
Quiescent current: below 50uA
Operating modes: 1. Power mode; 2. Voltage mode; 3. Mechanical mode
Resistance range of atomizer: 0.1~3 ohm
Display: 0.96 color screen with a black frame to avoid light-leaking
1. Functions of Keys
A. Press the "POWER" key for 5 consecutive times to power on or power off. The interface "COOLVAPOR" appears upon powering on; and the green light flashes for 3 times. "CHIPS BY SEVO" appears upon powering off.
B. Press the "POWER" key for 3 consecutive times to switch among power mode (to set the output power), voltage regulation mode and mechanical smoke mode.
C. Long press the "POWER" key to suck the smoke away; the white light flashes; the maximum heating time is 10s, after which the heating is stopped automatically with a prompt "Over time 10S".
D. Simultaneously press "+" and "-" to lock or unlock the keys. "KEY LOCK" appears when the keys are locked and "KEY UNLOCK" when they are unlocked. In case of any key operation when keys are locked, "Please Unlock" appears to prompt to unlock.
E. Press "POWER" and "-" to set the number of smoke suction port by pressing + or - when the number flashes. Short press the ignition key to confirm. If the number is 0, the number of ports is not limited. "Puff Limit" appears to prompt the excess of the number set.
F. Red light and red font on the display screen indicate abnormalities.
2. Intelligent Protection Functions and Prompts
A. Load short-circuit protection Shorted
B. Low load resistance protection: Low Resistance
C. High load resistance protection: High Resistance
D. Overtemperature protection: "Too Hot!" appears when the internal temperature of the circuit is too high; in such case, wait several seconds to let temperature go down before continuing to use.
E. Battery reverse connection protection: Battery reverse connection does no harm to the product, but it cannot be powered on.
F. Low battery voltage protection:
When the battery voltage is below 6.6V, no discharge operation is allowed. In such case, "Please Charge" is displayed when pressing the POWER key.
G. High battery voltage protection: When the battery voltage is detected to be
higher than 8.4V, it is deemed as abnormal power supply. In such case, "High Voltage" is displayed when pressing the POWER key.
In case of poor battery performance or long-time high-power continuous discharge, the battery voltage will be too low. "Weak Battery" appears to stop discharge at this moment.
Package Included
1* Authentic Cool Vapor STAN 200W VW Variable Wattage Box Mod
Product reviews can be carried out after the member login, please click here to login
You May Like
-
$10.59
-
$10.59
-
$10.59
-
$10.59
-
$51.49
-
$51.49
-
$51.49
-
$51.49
-
$51.49
